E-mail: HoverBoardPage@outlook.com
Tel: 8618650205888
Contact Us

E-mail:HoverBoardPage@outlook.com

Tel:8618650205888

Home > Exhibition > Content

Self-balancing vehicle-maintenance

Replacement tires

1. when replacing the tires, needs Hexagon screwdriver and a Phillips screwdriver.

2. use Phillips screwdriver loosen the lid out all of the screws (including screw on hand), and each side has 7.

3. the following 6 screws on each side of the footboard, loose power switch on the other side of the six hex screws. Note: never turn the power switch side of the Hexagon bolts.

4. After you unscrew these screws, cover with handle as the axis turning until the case without prejudice to remove the tire. There are some wires in the handle area, being careful not to break the wires. You can replace the tire and inner tube repair.

5. when the repair is finished, install the cover to the original position and tighten the screws.